基于频率变化率的结构刚度非均匀退化识别

针对不利环境作用、损伤等易造成结构局部损伤且刚度退化程度不均匀的问题,以受弯梁为研究对象,从构件动力特性入手,综合考虑损伤前后的模态挠度曲率和固有频率变化,提出了基于频率变化率的刚度非均匀退化识别方法。首先,在柔度矩阵的基础上推导模态挠度曲率,通过损伤前后模态挠度曲率的改变量识别损伤位置参数,判定损伤区域;其次,对损伤区域进行节段划分,从欧拉-伯努利梁的动力方程出发建立损伤程度、损伤区域位置参数与固有频率之间的矩阵函数,实现直接利用频率值变化评估构件不同区域损伤程度。研究结果表明,该方法能很好地识别结构局部损伤位置和损伤程度,尤其是对于结构局部刚度不均匀退化的评估具有明显的优势。     

The Nitrolysis Mechanism of 3,7‐Dinitro‐1,3,5,7‐tetraazabicyclo[3,3,1]nonane

Two intermediates, 1,5‐dinitroso‐3,7‐dinitro‐1,3,5,7‐tetraazacyclooctane (DNDS) and 1‐nitroso‐3,5,7‐trinitro‐1,3,5,7‐tetraazacyclooctane (MNX), were isolated and characterized in the synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane (HMX) from the nitrolysis of 3,7‐dinitro‐1,3,5,7‐tetraazabicyclo[3,3,1]nonane (DPT) for the first time. When the nitrolysis of DPT was slowed down, two intermediates were detected with HPLC. It was proposed that electrophilic NO₂⁺ and NO⁺ from HNO₃ and N₂O₄ might attack nitrogen atoms at positions 3 and 7 of DPT to form the cations of the intermediates, then nucleophilic H₂O attacked the bridge carbon atoms of DPT to produce the intermediates, which were oxidized to form HMX.     

生物慢滤工艺不同深度净化景观水效果研究

生物慢滤工艺对COD、SCOD和浊度去除率分别可达到49%、46%和77%;对COD、SCOD和浊度,系统表层填料对COD、SCOD和浊度的去除贡献较大;在填料5 cm以下装置对有机物和浊度的去除曲线斜率基本一致。生物慢滤池对于TP和溶解性磷酸盐可达到70%以上;系统对总氮去除率一般只有18.0%~30.0%,对氨氮去除率可达33%~67%。沿不同深度,磷和总氮的去除率基本呈不断增大的趋势;而氨氮的去除率呈现先增大后减小的规律。     

Association Colloids Formed by Multiple Surface Active Minor Components and Their Effect on Lipid Oxidation in Bulk Oil

Association colloids formed by surface active minor components play an important role in the oxidative stability of bulk oils. To imitate the formation of nanostructures in refined oils, multiple surface active minor components including phospholipids, free fatty acids, diacylglycerols and sterols were added to stripped corn oil. The critical micelle concentration (CMC) of the mixed components was determined. The impact of mixed minor components at below and above their CMC on oxidative stability of bulk oil and on antioxidant activity of α-tocopherol and Trolox was investigated. The CMC of the mixed surface active components in bulk oil was 20 µmol/kg oil in the presence of 383 ± 2 ppm of water. 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) played an important role on the formation of association colloids since it was the most important component in forming the association colloids as confirmed by CMC and fluorescence probe studies. The association colloids formed by the mixed components showed prooxidative activity in bulk oil as determined by monitoring the formation of lipid hydroperoxide and hexanal. The activity of α-tocopherol or Trolox was not changed by mixed components association colloids. These results suggest that association colloids both physically and chemically impacted the oxidative stability and activity of antioxidants in bulk oil.     

Impact of Phosphoethanolamine Reverse Micelles on Lipid Oxidation in Bulk Oils

Phospholipids are important minor components in edible oil that play a role in lipid oxidation. Surface active phospholipids have an intermediate hydrophilic–lipophilic balance value, which allows them to form association colloids such as reverse micelles in bulk oil. These association colloids can influence lipid oxidation since they create lipid–water interfaces where prooxidants and antioxidants can interact with triacylglycerols. In this study, we examined the formation of reverse micelles in a stripped oil system by dioleoyl phosphoethanolamine (DOPE) and the effect of these physical structures on lipid oxidation kinetics. The critical micelle concentration (CMC) of DOPE was approximately 200 µmol/kg oil at 45 °C. Oxidation kinetics studies showed that DOPE was prooxidative when it was above its CMC (400 and 1,000 µM), reducing the lag phase from 14 days (control) to 8 days. The addition of combinations of DOPE and dioleoyl phosphocholine (DOPC) resulted in formation of mixed micelles with a CMC of 80 µmol/kg oil at 45 °C. These mixed micelles were also prooxidative when concentrations (100 and 500 µM) were above the CMC, decreasing the lag phase from 14 to 8 days. These findings provide a better understanding of the role of phospholipids in lipid oxidation of edible oil and could contribute to better antioxidant solutions.     

Acrylate–vinylidene chloride copolymers derived from corresponding water‐borne latexes: Influence of acrylate units on their potential as heavy‐duty anticorrosive coating materials

A series of aqueous latexes with solid contents of 56%–59% were synthesized by binary emulsion copolymerization of vinylidene chloride (VDC) with an acrylate, namely methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), hexyl acrylate (HA), or 2‐ethylhexyl acrylate (EHA). Differential scanning calorimetry (DSC) and Fourier‐transform infrared (FTIR) spectroscopy showed that the acrylate units with short ester side‐chains, such as MA and EA, made the copolymers hard and the crystallization tendency of their PVDC segments was reduced. Hydrophobic acrylates with relatively long ester groups, such as HA and EHA, gave flexible copolymers, and favored the crystallization of their PVDC segments. BA endowed the copolymers with medium flexibility and crystallization tendency. As coating materials, the copolymers bearing MA and EA adhered poorly to the tinplate before or after 100 hr of salt‐spray corrosion, whereas those bearing BA, HA, or EHA showed good adhesion to tinplate when they had little or no crystallinity. After 100 hr of salt‐spray corrosion, only BA–VDC80, containing 80% VDC, retained both excellent adhesion to metal and excellent barrier performance. Further study demonstrated that BA–VDC80 could protect tinplate from rusting for at least 250 hr under harsh salt‐spray corrosion. Scanning electron microscopy, FTIR‐attenuated total reflectance spectroscopy and DSC were used to evaluate the corroded BA–VDC80 film. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40192.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

多层核壳结构丙烯酸酯乳液的粒径控制

研究了加料工艺、引发剂体系、乳化剂用量及复配比、聚合温度等因素对多层核壳结构乳胶粒子粒径的影响,采用连续滴加单体的加料工艺,选用复配乳化剂体系,在较低的乳化剂用量条件下,使用高效低温引发剂,在50℃引发聚合,合成了固含量为42%,平均粒径为64.9 nm,窄分布的具有多层核壳结构的聚丙烯酸酯乳液。     

轻质隔热吸音仿石漆制备工艺研究

介绍了轻质隔热吸音仿石漆的研制过程,讨论了配方设计过程中原材料的选择要点,通过正交实验确定包覆型轻质仿石骨料制备的最佳工艺条件为:石粉质量分数为20%,液固比为10∶1(体积比),包覆次数为2次,搅拌速度为500 r/min,搅拌时间为60 min。实验研究还表明,影响涂料体系密度的最大因素是石粉浓度,最小因素是液固比;影响吸水率的最大因素是搅拌时间,最小因素是石粉浓度。     

Optimum Ozone Dosage of Preozonation and Characteristic Change of Refractory Organics in Landfill Leachate

Preozonation on landfill leachate was carried out. COD removal rate has an obvious inflection at ozone dosage 0.186 mg_O3/mg_COD in ozonation process. Seven sets of identical O₃-SBR combined process under different ozone dosages were studied. The results indicated that the best COD removal rate of synergetic effect is also at 0.186 mg_O3/mg_COD. New organic substances produced after ozonation was confirmed by an excitation-emission matrix (EEM). Carbon dioxide production increased from 36.3 mg to 75.7 mg after ozonation, confirming that biodegradability of refractory organics in landfill leachate was enhanced. All the arguments indicated that the inflection point of COD removal by ozonation has a great significance for preozonation.